Integrations

Hi all, On May 1st, 2026, our JAMF environment went under maintenance and said maintenance was completed at 23:00 UTC on May 1st, 2026. This upgraded our instance to 11.27.1 After this maintenance period, we have noticed unusual issues within our IIQ/JAMF Environments. Most notably these two:1) After updating a device in IIQ (adding a new room, building, etc) the device in JAMF will begin an on/off cycle following the next Sync. For Example, we have an asset with a user, say Shayla Hopkins, and her email, shaylahopkins@district.org. This information, along with building location, is being sent over to Jamf via the JAMF MDM Integration. We have noticed that since this upgrade to 11.27.1, when additional information is added, JAMF is now cycling that information every night. So one day, Shayla Hopkins, shaylahopkins@district.org, and building are all there, the following day, after another nightly sync, all that info is gone in JAMF. Everything

Hello,I am looking for the specific payload requirements to programmatically create Knowledge Base articles.I noted a previous discussion where it was mentioned that KB creation might not be supported via API, but I have made some progress: Confirmed: GET /kb/articles/{id} (Read access works) Confirmed: POST /kb/articles (Search/List works) I am now trying to identify the correct endpoint and schema to create a new article. When attempting a POST to create, I need clarification on: The specific endpoint for creation (if different from the search endpoint). The required JSON structure (e.g., Tit

OverviewEffective January 1, 2026, Skyward sunset access to the Incident IQ Skyward SIS app for all districts utilizing Skyward Qmlativ. To ensure uninterrupted service, SIS data must now be integrated into iiQ using One-Roster CSV data via the Skyward CSV app.This guide outlines the best practices and step-by-step procedures for ensuring a seamless transition without data loss. Best Practice RecommendationDo not immediately uninstall the original Skyward app. We highly recommend temporarily running both the original S

I think it would be very helpful to have powerschool status as filter options.  I have been going through our unassigned users and have noticed several users who aren’t in the “No access” group but when I look them up in IIQ their powerschool status is “to be deleted”.   I would love to have the option to view all of the users with that status to help clean up our system.

We’re just starting with IncidentIQ and we’ve attempted to set up our SSO with Google. But every time that I try to login with my google account as an agent, I get an error that states that I’m unable to login:Login failed: That user is not set up in Incident IQ.[Email: [myemailaddress@schoolsite.com], UserId: 102499456635899842209, ETag: ]I’m in as an agent and the SSO authorization looks to be ok as it’s all green check marks when we look at it as the district admin in the configuration of the Google SSO application.We’ve also tried to login as a student to see if this works as well and get the same error. That the user is not set up in Incident IQ despite being in the Student user role and Google SSO being enabled in the google admin panel for the entire district.

Our district currently has to use AWS to handle the redirect from our CNAME to our Incident IQ instance. IIQ support has told us they are unable to manage this on their end. Has anyone else run into this? For most of our other vendors, they handle both the redirect and certificate generation, so I wanted to confirm whether this limitation is expected.

I’m looking for a filter to use in a POST to /tickets that allows me to return all tickets based on the “ForId” in the ticket. I know I can do this by returning all tickets and then filtering the list in my tool, but we’re approaching 70k tickets which would be hundreds of pages and an almost 400mb JSON file returned each time, so I was hoping for a more efficient method using a filter in the body. I’m building an automation that randomly selects a subset of users from a very large list of users and creates a ticket with them as the “On Behalf Of” (ForId in API speak). I’m randomizing and limiting so that I don’t overload my techs with hundreds of tickets at once. Once the ticket is complete, there are mechanisms to remove them from the list getting randomized for future batches. I want to be able to create another batch of tickets before the first batch is necessarily 100% complete, so I’m wanting to see if the specific user already has this specific tic

We are exploring the Google Calendar integration with iiQ Events and were wondering if there’s a way to only allow certain event types to export to the Google Calendar? We would like to use it as a public facing calendar so we don’t want internal events like conference room meetings and IEPs to appear on it. Also is there a way to link to multiple Google Calendars so we can separate our events based on building? a full district calendar can get crowded.

Is there a way to automate sending invoices/statements to students/parents biweekly or once a month?!--a=1-->

An API request using pagination for returning ~74,000 assets results in duplicate values although the total items returned is correct.After doing some research, the issue could be related to non-deterministic ordering on the endpoint. How does iiQ order items in the query on their API endpoint?

Is there an integration that pulls from Mosyle, if the device is online or in use somewhere, like Google and Microsoft do?  We want to do the Smart Audit, but doesn’t look like there is a way to pull the iPad and Macbook info.

Need guidance to structure a communication workflow for managing active incidents in IIQ using the Announcement App, ticketing, and tiered user alerts.   

Hello!I’m working with the incident IQ API, and was able to get the API to work for some get methods, but what I need is a way to get all the ticket IDs through the API, but was not able to figure it out.I’ve been reading through the documentation below, but haven’t found a way to get all tickets.https://incidentiq.stoplight.io/docs/v1/Could someone please help me or point me towards the right direction?Thank you!

Hello: I am looking for where do I find the update. This is saying our connection is not supported. Where do I find the new supported API?   

I am looking for a way to pull out a specific field from our SIS integration with Synergy.Our users sync with ADFS and we do sync with Synergy classes and other data, but I am looking for one specific field from Synergy called " Administrator Name: " How can I add that field to write to IIQ (only a 1 way sync is needed here to write that admin to IIQ)I have put this in as a ticket as well just not gotten any answers if this is even possible.  

It would be extremely helpful if we had the ability to set what time of day that they Google SSO app syncs for importing users.  Right now it seems to just auto sync 24 hours after the last sync was.For our use case, syncing once a day is fine, but right now the auto sync for us is at about 10 am.  Our SIS syncs with Google overnight so we may have a new user registered, but they will not have an account in IIQ until 10am the next day.  That means that the student won’t be able to get a device checked out to them until after that time.  This really hampers with the workflow of our Library staff.I would be great to have the ability to set the syncs to happen overnight after our SIS sync time so everything would be ready to go every morning.

Is there a way to sort iiQ Knowledge Based Articles within categories/subcategories by non-alphabetical means? Like could we assign a priority to an article based on number of tickets received and bump that article to the top of the list within a category?

Hello! We are beginning to process fines in IIQ for staff users. We utilize Intouch for our payment system. It was discovered that there was a recent change to staff IDs in InTouch from the recent migration to Qmlativ. I was informed that if we need to add staff fines to IIQ, there will need to be a crosswalk done to the IDs in IIQ so that the IDs match in both systems.  Intouch let me know that someone from Kent (or from IIQ) would need to do the crosswalk. Student fines are working great and have not been an issue. Has anyone else encountered this? I have already looped in our CSM but wanted to put this in the community as well. Thank you!

We have an integration with FileWave. When our iPads are imported in, the model “iPad” shows up in the Model Mappings tab. We currently have it mapped to just Apple iPads. We would really like it to sync with the actual model of the ipads (10th, 9th, 8th generation, etc.) so that we can better track the age of devices. Right now - we have over 3,000 iPads that all say model “iPad” any help would be appreciated. 

I am trying to have my API pull data from my Parts Views, but when I pull the View using the https://District.incidentiq.com/api/v1.0/views/ViewID, It only pulls the settings of the View and not the Actual Data. I looked through the API Documentation and wasnt able to Find anything to help. Mainly basing the API on https://apihub.incidentiq.com/#0036adef-3067-44a6-80e0-9dc36775ad89

Is there a way I can extract the “replay-to email” from a ticket created using API.Example:Someone creates a ticket, I get an email where I can respond to and it creates a comment from the email response. Can I get that email address using API? I know I can get the address by just looking at the sender on my email but the API would make things way easier for a tool I am developing.I tried the https://csd509j.incidentiq.com/api/v1.0/search but it doesn’t seem to provide the email I can use to create comments. 

I am trying to update ticket statuses through the API. The rest api documentation seems to have or used to have a section dedicated to this subject but it is no longer linked to anything in the docs.Everytime I try to update the workflow status nothing changes. I can see related “on update” rules fire but never see any change in the ticket. I also tried to update the subject to see if that was my issue and though I can see the subject update in the timeline log it never actually updates.Is this a limitation of the demo environment or is it not possible to update ticket statuses?

When installing Jamf Pro, it prompts for a username and password. Should I use my own Jamf Pro login credentials for this, or is it recommended to create and use a generic account specifically for installation purposes?

Hi.We are exploring using IIQ for Google Data writeback for Chromebook devices/Student organization with reference to Clever badge deployment. Asking the community if anyone has gone through the experience using IIQ google data writeback, and possibly share Thanks in advance -Andy Taylor

Since there is no SMS notification option for agents, and since AT&T has shutdown their e-mail to text gateway (number@txt.att.net) and Verizon will soon do the same, I need to engineer another method of getting updates to agents via text.  I use Twilio from other monitoring systems to send SMS - how can I create notifications from IIQ to Twilio using webhooks or other API?